วันเสาร์, มิถุนายน 09, 2550

FDISK Tutorial

FDISK Tutorial

The Basics of Fdisk:
Primary partitions are the only one that are bootable. They're always the C: drive when active. Normally you can only have one (more with some special tricks etc.) Extended partitions are needed when you want more than one partition. You can only have ONE Extended partition. Logical Drives come into the Extended partition. They are handy since you know that you can only have one Primary and one Extended so you can get more than only two partitions. They would be your D:, E:, etc. drives.

First you need to reboot your system with the Boot Disk inserted.

1.At the A: prompt start "FDISK."

2.If asked to use Large Disc support say Yes.

3.The first screen looks like this:

Create Dos Partition or Logical Drive
Set Active Partition
Delete Partitions or Logical DOS Drives
Display Partition Information
Change current fixed drive. (In case you have two or more Hard Drivess)
So, to prepare you hopefully did a backup from your data. You did, didn't you ?!

4.Next we need to remove the existing partitions. So go to 3.

5.Next screen like this:

Delete Primary DOS
Delete Extended DOS
Delete Logical Drives
Delete Non-DOS
Delete always in the following order

Logical (All) > Extended > Primary (Last)

6.Go back to first screen after all partitions have been removed.

7.Now we need to setup our new partitions. Go to 1.

This screen looks like this:

Create Primary DOS
Create Extended DOS
Create Logical DOS Drives
Here we create in the following order

Primary > Extended > Logical Drives.

8.First create the Primary. If asked to use all space say No and enter the amount you wish for the C: drive. It should be set automatically to be the (only) Active partition. If not it may ask you or you have to select "2. Set active partition" from the main menu.

9.Next create the Extended Partition. Use all space left.

It probably advances automatically to the next step, creating the Logical DOS Drives.

10.Enter the amount you wish for the D: partition and than the rest for the third partition.
Think first about the size for the partitions.

OK now we're finished with FDISK so just exit it. Next you need to reboot with the disc still inserted and Format all partitions (the C: partition might need to be formatted with "format c: /s", check the Win95 tip). Another reboot and you can go ahead and install Windows.

When your system supports booting from CD just insert the Windows CD and reboot. The setup will start.

If not, follow these steps:

Win98: insert Boot Disk and CD, reboot, choose "2. boot with CDROM support" and once you're at the prompt change to your CD-drive letter (depends on your partition setup) and enter "setup".
Win95: You must format the C: partition with "Format C: /s"!. Next install your CDROM driver, reboot, insert the Win95 CD, change to the CD-driveletter, enter
"setup".
I hope I made no mistakes.

Disable CD Autorun

Disable CD Autorun

1) Click Start, Run and enter GPEDIT.MSC
2) Go to Computer Configuration, Administrative Templates, System.
3) Locate the entry for Turn autoplay off and modify it as you desire.

Speed up your browsing of Windows 2000 & XP machines

Speed up your browsing of Windows 2000 & XP machines

Here's a great tip to speed up your browsing of Windows XP machines. Its actually a fix to a bug installed as default in Windows 2000 that scans shared files for Scheduled Tasks. And it turns out that you can experience a delay as long as 30 seconds when you try to view shared files across a network because Windows 2000 is using the extra time to search the remote computer for any Scheduled Tasks. Note that though the fix is originally intended for only those affected, Windows 2000 users will experience that the actual browsing speed of both the Internet & Windows Explorers improve significantly after applying it since it doesn't search for Scheduled Tasks anymore. Here's how :

Open up the Registry and go to :

HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/Current Version/Explorer/RemoteComputer/NameSpace

Under that branch, select the key :

{D6277990-4C6A-11CF-8D87-00AA0060F5BF}

and delete it.

This is key that instructs Windows to search for Scheduled Tasks. If you like you may want to export the exact branch so that you can restore the key if necessary.

This fix is so effective that it doesn't require a reboot and you can almost immediately determine yourself how much it speeds up your browsing processes.

IP address of your connection

IP address of your connection
Go to start/run type 'cmd'
then type 'ipconfig'
Add the '/all' switch for more info

NTFS vs. FAT

NTFS vs. FAT

To NTFS or not to NTFS—that is the question. But unlike the deeper questions of life, this one isn't really all that hard to answer. For most users running Windows XP, NTFS is the obvious choice. It's more powerful and offers security advantages not found in the other file systems. But let's go over the differences among the files systems so we're all clear about the choice. There are essentially three different file systems available in Windows XP: FAT16, short for File Allocation Table, FAT32, and NTFS, short for NT File System.
FAT16
The FAT16 file system was introduced way back with MS–DOS in 1981, and it's showing its age. It was designed originally to handle files on a floppy drive, and has had minor modifications over the years so it can handle hard disks, and even file names longer than the original limitation of 8.3 characters, but it's still the lowest common denominator. The biggest advantage of FAT16 is that it is compatible across a wide variety of operating systems, including Windows 95/98/Me, OS/2, Linux, and some versions of UNIX. The biggest problem of FAT16 is that it has a fixed maximum number of clusters per partition, so as hard disks get bigger and bigger, the size of each cluster has to get larger. In a 2–GB partition, each cluster is 32 kilobytes, meaning that even the smallest file on the partition will take up 32 KB of space. FAT16 also doesn't support compression, encryption, or advanced security using access control lists.
FAT32
The FAT32 file system, originally introduced in Windows 95 Service Pack 2, is really just an extension of the original FAT16 file system that provides for a much larger number of clusters per partition. As such, it greatly improves the overall disk utilization when compared to a FAT16 file system. However, FAT32 shares all of the other limitations of FAT16, and adds an important additional limitation—many operating systems that can recognize FAT16 will not work with FAT32—most notably Windows NT, but also Linux and UNIX as well. Now this isn't a problem if you're running FAT32 on a Windows XP computer and sharing your drive out to other computers on your network—they don't need to know (and generally don't really care) what your underlying file system is.
The Advantages of NTFS
The NTFS file system, introduced with first version of Windows NT, is a completely different file system from FAT. It provides for greatly increased security, file–by–file compression, quotas, and even encryption. It is the default file system for new installations of Windows XP, and if you're doing an upgrade from a previous version of Windows, you'll be asked if you want to convert your existing file systems to NTFS. Don't worry. If you've already upgraded to Windows XP and didn't do the conversion then, it's not a problem. You can convert FAT16 or FAT32 volumes to NTFS at any point. Just remember that you can't easily go back to FAT or FAT32 (without reformatting the drive or partition), not that I think you'll want to.
The NTFS file system is generally not compatible with other operating systems installed on the same computer, nor is it available when you've booted a computer from a floppy disk. For this reason, many system administrators, myself included, used to recommend that users format at least a small partition at the beginning of their main hard disk as FAT. This partition provided a place to store emergency recovery tools or special drivers needed for reinstallation, and was a mechanism for digging yourself out of the hole you'd just dug into. But with the enhanced recovery abilities built into Windows XP (more on that in a future column), I don't think it's necessary or desirable to create that initial FAT partition.
When to Use FAT or FAT32
If you're running more than one operating system on a single computer (see Dual booting in Guides), you will definitely need to format some of your volumes as FAT. Any programs or data that need to be accessed by more than one operating system on that computer should be stored on a FAT16 or possibly FAT32 volume. But keep in mind that you have no security for data on a FAT16 or FAT32 volume—any one with access to the computer can read, change, or even delete any file that is stored on a FAT16 or FAT32 partition. In many cases, this is even possible over a network. So do not store sensitive files on drives or partitions formatted with FAT file systems.

วันพุธ, มิถุนายน 06, 2550

ทฤษฎีการแพร่กระจายนวัตกรรม

การยอมรับ (Adoption) สิ่งใดของสังคม จะมีกระบวนการ (Process) คล้ายๆ กัน โดยเริ่มต้นจากมีสิ่งใหม่เกิดขึ้น มีคนกลุ่มหนึ่งยอมรับคิดว่าดีแล้ว จะเกิดการแพร่กระจาย (Diffusion) ไปตามช่องทางการสื่อสาร (Channels) ต่างๆ ของคนกลุ่มหนึ่งไปสู่อีกกลุ่มหนึ่งในสังคม อยู่ที่สิ่งใหม่นั้นมีความดึงดูดใจสูงก็จะทำให้การยอมรับสิ่งนั้นในสังคม ใช้ระยะเวลาในการยอมรับสั้นขึ้น เช่น การนิยมใส่สายเดี่ยวจากเซนเตอร์พ้อยต์แพร่กระจายถึงบ้านนาทองริมฝั่งโขง หรือช่างกลที่เป็นอริกันก็นิยมยีนส์รัดรูปเหมือนกัน หรือการใส่หมวกไหมพรมนุ่งยีนส์หลวมๆ ถือสเก็ตบอร์ดขึ้นรถเมลล์เหมือนเด็กฮิปฮ้อปจากย่านบร๊องซ์แพร่มาถึงกรุงเทพ ว่ากันว่าการแพร่กระจายบางสิ่งเราไม่สามารถต้านมันได้เช่นหมวกไหมพรมและถือสเก็ตบอร์ดแม้บ้านเราร้อนเพียงใดแม้ฝรั่งจะดูแคลนในใจว่าทำไมเราต้องเลียนแบบคนดำในอเมริกาด้วย นั่นเพราะว่าในขณะเวลานั้นสิ่งใดสิ่งหนึ่งเกิดการยอมรับแล้วว่าเป็นทางเลือกที่ดีที่สุดในกลุ่มคนในสังคมนั้นๆ จึงต้องรับไป เด็กบ้านเราจึงต้องใส่หมวกไหมพรมและตรากตรำซ้อมสเก็ตบอร์ดกันจนดึกดื่น เพราะเราไม่สามารถมีทางเลือกสิ่งที่ทำให้ดูดีกว่านี้ได้ในช่วงเวลานั้น เพราะสังคมที่พวกเขาอยู่ยอมรับว่าสิ่งนั้นเป็นทางเลือกดีที่สุด แต่จะเห็นได้ว่าการแพร่กระจายความนิยมเหล่านี้เกิดขึ้นอย่างรวดเร็ว โดยไม่มีการโฆษณาประชาสัมพันธ์หรือ Promotion ใดให้เกิดความนิยม แต่ล้วนแล้วเกิดการแพร่กระจายอย่างรวดเร็วไปตามช่องทางสื่อสารต่างๆ สังคมโดยธรรมชาติ ธรรมชาติของโทรคมนาคมเกี่ยวข้องกับเทคโนโลยีและธุรกิจสมัยใหม่ก็เช่นกัน มีการเปลี่ยนแปลงพัฒนาเทคโนโลยีและนวัตกรรม (Innovation) อย่างรวดเร็วอยู่เสมอ แต่การยอมรับนวัตกรรม นั้นจะแตกต่างจากการแพร่กระจายความนิยมอื่นในสังคม เนื่องจากต้องมีการเรียนรู้การใช้งาน ต้องมีความคุ้มค่าของเงิน ต้องมีปัจจัยหลายอย่างดังที่บทความนี้ย่อทฤษฎีการแพร่กระจายทางนวัตกรรมมาให้พอเข้าใจดังนี้ Invention นั้น คือการประดิษฐ์ อาจจะเป็นสิ่งประดิษฐ์ที่มีความใหม่หรือไม่ใหม่ก็ได้ แต่ Innovation นั้น คำไทยเราเรียกกันว่า นวัตกรรม ซึ่งแปลว่า สิ่งประดิษฐ์ที่สามารถนำมาทำเป็นสินค้าหรือธุรกิจได้ (Commercial Product)


ทฤษฎีการแพร่กระจายนวัตกรรม Diffusion of Innovations Theory (DOI) ของ Everett Roger
แนวความคิดทฤษฏีของ Roger ได้แบ่งกลุ่มคนในสังคมที่จะยอมรับการแพร่กระจายทางเทคโนโลยีไว้ดังนี้
++++Consumer++++++%++++++Behavior+++++++++++++Characteristics++++
Innovators 2.5% ต้องเป็นคนแรก ผู้ที่ชอบเสี่ยง เป็นนักประดิษฐ์หรือมีความรอบรู้เทคโนโลยี
Early adopters 13.5% ชอบลองของใหม่ ชอบเป็นผู้นำ ได้รับความนิยมทางสังคม มีการศึกษา ชอบความใหม่
Early majority 34% อยากมีบ้าง เป็นคนรอบคอบ ชอบแบบสบายๆ ไมเป็นทางการ
Late majority 34% จำเป็นต้องมี เป็นคนช่างสงสัย หัวโบราณ ฐานะไม่ดี
Laggards 16% มีก็ดีเหมือนกัน รับฟังข้อมูลจากคนรอบข้าง เช่น เพื่อน หรือญาติ และกลัวการเป็นหนี้

กระบวนการ Social Adoption นั้น การยอมรับสิ่งที่เกี่ยวข้องกับเทคโนโลยี จะต้องอาศัยช่องทาง (Channels) ในการสื่อสารของบุคคลกลุ่มต่างๆ ในสังคม เพื่อสื่อสารจากกลุ่มหนึ่งไปสู่อีกกลุ่มหนึ่ง เมื่อ Innovators หรือผู้ที่ชื่นชอบเทคโนโลยีหรือนักประดิษฐ์หรือผู้สร้างกระบวนการสังคม เกิดการยอมรับนวัตกรรมใดแล้ว จะเกิดกระบวนการสื่อสารให้บุคคลกลุ่มถัดมาได้รับรู้ข้อมูลและการยอมรับ กลุ่มต่อมาคือกลุ่ม Early Adopters เป็นกลุ่มผู้ที่ชอบลองอะไรใหม่ๆ มีความรู้สูง ค่อนข้างมีฐานะและสนใจข่าวสารใหม่อยู่เสมอ การยอมรับเรื่องราวเกี่ยวกับเทคโนโลยีของกลุ่มนี้ถือว่ามีความสำคัญมากที่สุด เพราะถือเป็นกลุ่มชั้นผู้นำในการยอมรับของสังคม ไม่ว่าเทคโนโลยีหรือการยอมรับองค์กรใดที่เกี่ยวข้องกับเทคโนโลยีคนกลุ่มนี้จะเป็นผู้ชี้ว่า “มีอยู่หรือดับไป” ด้วยการตอบคำถามจนสิ้นสงสัยก็จะข้ามพ้นหุบเหวแห่งการยอมรับ (The Chasm) และคนกลุ่มอื่นที่เหลือในสังคมจะเกิดการยอมรับเอง

ถัดมาเป็นกลุ่ม Early Majority เป็นคนกลุ่มใหญ่ที่สุดอีกกลุ่มหนึ่งในสังคม (กลุ่มนี้เป็นกลุ่มสำคัญที่ต้องการใช้เทคโนโลยี เทคโนโลยีส่วนใหญ่ถูกออกแบบมาเพื่อคนกลุ่มนี้: ผู้เขียน) กลุ่มนี้จะตัดสินใจได้ต้องคิดหลายรอบและคำนึงถึงประโยชน์ที่ได้รับ การตัดสินใจเลือกนวัตกรรมหรือการยอมรับเรื่องราวที่เกี่ยวข้องกับเทคโนโลยีของกลุ่มนี้มักดูจากการตัดสินใจของสองกลุ่มแรกก่อนและให้น้ำหนักไปที่การยอมรับของกลุ่มที่สอง

Late majority เป็นคนกลุ่มใหญ่ที่สุดอีกกลุ่มหนึ่งในสังคม อาจจะเป็นชนชั้นแรงงานที่ไม่รู้กระบวนการหาความรู้ในการเลือกยอมรับเทคโนโลยี โดยคุณลักษณะจะเป็นคนช่างสงสัย, หัวโบราณ, ฐานะไม่ดี การยอมรับของคนกลุ่มนี้จะดูจากการยอมรับของกลุ่ม Early Majority และการจะมีใช้เทคโนโลยีของคนกลุ่มนี้ต้องมีความจำเป็นจริงๆ
Laggards เป็นกลุ่มคนหลังสุดในสังคมที่จะยอมรับเทคโนโลยี โดยวิธีการยอมรับจะฟังข้อมูลจากคนรอบข้าง เช่น เพื่อน หรือญาติ และกลัวการเป็นหนี้ แต่การมีใช้เทคโนโลยีจะไม่ถึงกับมีความจำเป็นเพียงแต่เห็นประโยชน์ว่ามีก็ดีเหมือนกัน เป็นลักษณะการคล้อยตามผู้อื่นมากกว่า แบบจำลองการแพร่กระจายที่มีชื่อเสียงมากที่สุดคือ แบบจำลองของ Roger (1995) ดังรูปที่ 1 ซึ่งเขานิยามไว้ว่าคือ กระบวนการซึ่งนวัตกรรมถูกสื่อสารผ่านช่องทางต่างๆ ของระบบสังคม โดยใช้เวลาในการเข้าสู่สมาชิกในสังคม ทั้งสี่ส่วนประกอบหลักในสังคมนั่น คือ นวัตกรรม ช่องทางในการสื่อสาร เวลา และ ระบบสังคม
- Critical mass จำนวนผู้ที่ยอมรับเทคโนโลยีหรือนวัตกรรมน้อยที่สุด ที่ยังคงมีการปฏิสัมพันธ์กันระหว่างนวัตกรรมและผู้ยอมรับนวัตกรรมเทคโนโลยีนั้น ซึ่งอัตราการยอมรับนั้นเพียงพอจะทำให้มันยังคงมีเทคโนโลยีนั้นอยู่ได้ด้วยตัวมันเองต่อไปได้ เช่น การมีใช้ เพจเจอร์ ในปัจจุบัน สินค้าหรือบริการนั้นจะกลายเป็นตลาดบริการขนาดเล็กเฉพาะกลุ่ม (Niche Service)

- ความดึงดูดใจของนวัตกรรม (Attractiveness of Innovation) Arthur (1988) ได้นิยาม ความดึงดูดใจของนวัตกรรม (Attractiveness of Innovation) ไว้ว่า คือ ผลตอบรับนวัตกรรมที่เพิ่มขึ้น (Increasing Returns of Innovation) ถ้าระดับ ความดึงดูดใจมีสูง นวัตกรรมนั้นจะถูกชักนำให้เกิดการยอมรับมากขึ้น ซึ่ง Arthur เชื่อว่าความดึงดูดใจของนวัตกรรมสัมพันธ์กับปัจจัยห้าประการดังนี้
Learning by Using (Rosenburg, 1982) การยอมรับเทคโนโลยีของคนจำนวนมากจะขึ้นอยู่กับการใช้นวัตกรรมเทคโนโลยีนั้นและเรียนรู้เกี่ยวกับการใช้เทคโนโลยีนั้นด้วยตนเอง (ความดึงดูดใจอาจจะอยู่ที่ความง่ายในการใช้งานนวัตกรรมนั้น: ผู้เขียน) ซึ่งการเรียนรู้การใช้งานนวัตกรรมของคนในสังคมจะเป็นผลให้เทคโนโลยีนั้นมีการพัฒนาและปรับปรุงประสิทธิภาพอย่างต่อเนื่อง

Network Externalities (Katz and Shapiro, 1985) คำนี้เราจะเห็นบางท่านใช้ความหมายผิด เห็นคำว่า Network เลยนึกว่าเป็นโครงข่ายโทรคมนาคม แต่มันไม่ใช่ครับ เป็นเครือข่ายของผู้ใช้เทคโนโลยีหรือนวัตกรรมในสังคม เทคโนโลยีหรือนวัตกรรมนั้นจะต้องรักษาฝีเท้า (Keep pace) ในการเพิ่มจำนวนผู้ยอมรับเทคโนโลยี ให้มีเครือข่ายผู้ใช้มากขึ้นเรื่อย อาทิเช่น การยอมรับเทคโนโลยีวิดีโอเทป VHS ซึ่งถูกนำมาผลิตใหม่ต่อสู้กับ เทคโนโลยี Betamax ซึ่งมีผู้ใช้อยู่แล้วจำนวนมาก การเพิ่มขึ้นของผู้ยอมรับนั้นอยู่ที่การเกิดประโยชน์ต่อผู้ยอมรับซึ่ง VHS นี้สามารถใช้งานร่วมกับเทคโนโลยีอื่นได้ทั้ง การบันทึกวิดีโอเทป และการเล่นเทปคาสเส็ต เป็นต้น หรือจะเห็นได้ชัดเจนอีกอันคือการยอมรับ กล้องดิจิตอลกับกล้องฟิล์ม กล้องฟิล์มมีผู้ใช้อยู่แล้วจำนวนมาก แต่กล้องดิจิตอลมีการรักษาฝีเท้าในการเพิ่มผู้ยอมรับเทคโนโลยีมากขึ้นๆ จนในที่สุดเกิดการยอมรับนวัตกรรมเทคโนโลยีนี้ในปัจจุบัน อันเนื่องมาจากนวัตกรรมนี้มีความดึงดูดใจสูง

Scale Economies in Production หรือเราได้ยินบ่อยๆว่า Economy of Scale คำนี้ก็มีให้เห็นคนใช้ความหมายกันผิดบ่อยๆ ความหมายที่แท้จริงกล่าวให้เข้าใจง่ายคือ “นวัตกรรม ที่ผลิตมากๆ จะทำให้ต้นทุนต่ำลง” (ผู้เขียน) เมื่อเทคโนโลยีถูกรวมเข้าเป็นผลิตภัณฑ์ เช่น เราสั่งขึ้นโมลด์พลาสติค 10,000 บาท หากเราผลิตสินค้า l0 ชิ้นนั่นหมายถึง เรามีภาระต้นทุนจากโมลด์นี้ ชิ้นละ 1,000 บาท แต่หากเราผลิตจำนวนมากๆ เช่น ผลิต 10,000 ชิ้น ต้นทุนต่อชิ้นจะเหลือเพียง 1 บาทเท่านั้น นี่คือ Economy of Scale จะเห็นได้ว่าการเข้าไปเป็นผู้ผลิตเทคโนโลโนยีของไทยเรานั้นคงยาก เมื่อประเทศอื่นๆ ต้นทุนแรกเริ่มเค้าคงหมดไปแล้วอันเนื่องมาจาก Economy of Scale เราเข้าไปแข่งสินค้าที่มีอยู่แล้วคงมีแต่ล่มจม ดังนั้นต้องหาสนามต่อสู้ใหม่ Economy of Scale จะทำให้การแพร่กระจายทางเทคโนโลยีเพิ่มขึ้นไปด้วย

Increasing Information Returns เมื่อเทคโนโลยีได้ถูกแพร่กระจายไปอย่างกว้างขวางแล้ว ประโยชน์ที่เกิดจากการได้รับรู้และเข้าใจนวัตกรรมเทคโนโลยีใหม่นั้น อาจทำให้ผู้ยอมรับเทคโนโลยีพบกับความเสี่ยงและเห็นประโยชน์จากการใช้เทคโนโลยีเดิมดีกว่า เช่น เทคโนโลยี ยูนิกส์ (UNIX) ครั้งแรกถูกกล่าวถึงว่ามีประสิทธิภาพมากกว่า ไมโครซอฟท์ วินโดวส์ แต่ท้ายที่สุดแล้วประโยชน์ที่ได้จากการรับรู้และการแพร่กระจายทางเทคโนโลยีกลับทำให้ผู้รับเทคโนโลยีใหม่รู้สึกว่า วินโดวส์ ง่ายในการใช้งานมากกว่า

Technological Interrelations เทคโนโลยีอาจถูกแพร่กระจายไปกับการเป็นเทคโนโลยีย่อยหรือส่วนหนึ่งของสินค้าทางด้านสาธารณูปโภค (Infrastructures) หรืออุปกรณ์ที่ช่วยสนับสนุนให้ผู้ใช้งานมีส่วนในการแพร่กระจายทางเทคโนโลยีรวดเร็ว อาทิเช่น เทคโนโลยีการผลิตน้ำมัน ได้ถูกแพร่กระจายออกไปก็เกิดมีอุตสาหกรรมการกลั่นน้ำมันขึ้น เกิดปั๊มน้ำมันขึ้นและส่วนต่างๆ ของรถยนต์ที่เกี่ยวข้องกับการใช้น้ำมันก็ทำให้เทคโนโลยีแพร่กระจายอย่างรวดเร็วมากยิ่งขึ้นตามมา ปัจจัยต่างๆ มากมายนั้นจะเป็นแรงดึงดูดให้จำนวนคนยอมรับนวัตกรรมนั้นๆ มากขึ้นและเป็น Network Externalities โดยตรง

เมื่อเราเข้าใจกระบวนการเกิดการยอมรับนวัตกรรมในสังคมแล้ว ทำให้เราสามารถคาดการณ์การทำธุรกิจและคาดการณ์การทำแผนการตลาดเจาะกลุ่มเป้าหมายได้ถูกต้องมากขึ้น เพื่อวางแผนดำเนินการสร้างการยอมรับสินค้าและนวัตกรรมเราได้ในอนาคต

คำสั่งลัด Windows แค่ Run ก็ทำงานได้ดั่งใจ

การใช้คำสั่งที่เป็นข้อความ(Command-line) ในการสั่งงานวินโดวส์นั้น สามารถทำได้โดยเรียกหน้าต่าง Run ขึ้นมาก่อน โดยคลิกไปที่ปุ่ม Start แล้วเลือกเมนู Run…


Add Hardware Wizard > hdwwiz.cpl
Add/Remove Programs > appwiz.cpl
Administrative Tools > control admintools
Automatic Updates > wuaucpl.cpl
Bluetooth Transfer Wizard > fsquirt
Calculator > calc
Certificate Manager > certmgr.msc
Character Map > charmap
Check Disk Utility > chkdsk
Clipboard Viewer > clipbrd
Command Prompt > cmd
Component Services > dcomcnfg
Computer Management > compmgmt.msc
Date and Time Properties > timedate.cpl
DDE Shares > ddeshare
Device Manager > devmgmt.msc
Direct X Control Panel (If Installed)* > directx.cpl
Direct X Troubleshooter > dxdiag
Disk Cleanup Utility > cleanmgr
Disk Defragment > dfrg.msc
Disk Management > diskmgmt.msc
Disk Partition Manager > diskpart
Display Properties > control desktop
Display Properties > desk.cpl
Display Properties (w/Appearance Tab Preselected) > control color
Dr. Watson System Troubleshooting Utility > drwtsn32
Driver Verifier Utility > verifier
Event Viewer > eventvwr.msc
File Signature Verification Tool > sigverif
Findfast > findfast.cpl
Folders Properties > control folders
Fonts > control fonts
Fonts Folder > fonts
Free Cell Card Game > freecell
Game Controllers > joy.cpl
Group Policy Editor (XP Prof) > gpedit.msc
Hearts Card Game > mshearts
Iexpress Wizard > iexpress
Indexing Service > ciadv.msc
Internet Properties > inetcpl.cpl
IP Configuration (Display Connection Configuration) > ipconfig /all
IP Configuration (Display DNS Cache Contents) > ipconfig /displaydns
IP Configuration (Delete DNS Cache Contents) > ipconfig /flushdns
IP Configuration (Release All Connections) > ipconfig /release
IP Configuration (Renew All Connections) > ipconfig /renew
IP Configuration (Refreshes DHCP & Re-Registers DNS) > ipconfig /registerdns
IP Configuration (Display DHCP Class ID) > ipconfig /showclassid
IP Configuration (Modifies DHCP Class ID) > ipconfig /setclassid
Java Control Panel (If Installed) > jpicpl32.cpl
Java Control Panel (If Installed) > javaws
Keyboard Properties > control keyboard
Local Security Settings > secpol.msc
Local Users and Groups > lusrmgr.msc
Logs You Out Of Windows > logoff
Microsoft Chat > winchat
Minesweeper Game > winmine
Mouse Properties > control mouse
Mouse Properties > main.cpl
Network Connections > control netconnections
Network Connections > ncpa.cpl
Network Setup Wizard > netsetup.cpl
Notepad > notepad
Nview Desktop Manager (If Installed) > nvtuicpl.cpl
Object Packager > packager
ODBC Data Source Administrator > odbccp32.cpl
On Screen Keyboard > osk
Opens AC3 Filter (If Installed) > ac3filter.cpl
Password Properties > password.cpl
Performance Monitor > perfmon.msc
Performance Monitor > perfmon
Phone and Modem Options > telephon.cpl
Power Configuration > powercfg.cpl
Printers and Faxes > control printers
Printers Folder > printers
Private Character Editor > eudcedit
Quicktime (If Installed) > QuickTime.cpl
Regional Settings > intl.cpl
Registry Editor > regedit
Registry Editor > regedit32
Remote Desktop > mstsc
Removable Storage > ntmsmgr.msc
Removable Storage Operator Requests > ntmsoprq.msc
Resultant Set of Policy (XP Prof) > rsop.msc
Scanners and Cameras > sticpl.cpl
Scheduled Tasks > control schedtasks
Security Center > wscui.cpl
Services > services.msc
Shared Folders > fsmgmt.msc
Shuts Down Windows > shutdown
Sounds and Audio > mmsys.cpl
Spider Solitare Card Game > spider
SQL Client Configuration > cliconfg
System Configuration Editor > sysedit
System Configuration Utility > msconfig
System File Checker Utility (Scan Immediately) > sfc /scannow
System File Checker Utility (Scan Once At Next Boot) > sfc /scanonce
System File Checker Utility (Scan On Every Boot) > sfc /scanboot
System File Checker Utility (Return to Default Setting) > sfc /revert
System File Checker Utility (Purge File Cache) > sfc /purgecache
System File Checker Utility (Set Cache Size to size x) > sfc /cachesize=x
System Properties > sysdm.cpl
Task Manager > taskmgr
Telnet Client > telnet
User Account Management > nusrmgr.cpl
Utility Manager > utilman
Windows Firewall > firewall.cpl
Windows Magnifier > magnify
Windows Management Infrastructure > wmimgmt.msc
Windows System Security Tool > syskey
Windows Update Launches > wupdmgr
Windows XP Tour Wizard > tourstart
Wordpad > write

วันอังคาร, มิถุนายน 05, 2550

บรรยากาศออฟฟิศ Google

โลโก้กูเกิลด้านใน ติดกับลิฟท์


Googleplex ล็อบบี้ไว้รับแขก




Googleplex ออฟฟิศใหม่ในลอนดอน ประเทศอังกฤษ



Big G กำลังโชว์ กูเกิลเอิร์ธอยู่ครับ




ของที่ระลึก เป็นปากกาเรืองแสงของกูเกิล จริงๆซื้อได้ที่ http://www.googlestore.com/





ด้านในอนุญาตให้นำเอาสัตว์เลี้ยงเข้ามาได้ แต่ต้องสะอาดนะครับ





ใน Partition ตกแต่งตัวการ์ตูนได้เต็มที่



คนนี้ใช้สองจอพร้อมกันเลย


มุมสนุก




อาหารสำเร็จรูปและขนมขบเคี้ยวแจกฟรี


ใช่ segway หรือเปล่า?




กระดานไวท์บอร์ด .. ดูเหมือนนี่คือแผนการที่มาของ google earth



ห้องประชุม


อันนี้น่าจะเป็นอีกเกม



ขอโต๊ะนึงไว้ในออฟฟิศบ้างสิ





อาหาร ทั้งหมดฟรีครับ






ห้องของผู้บริหาร ทำไมมืดจัง



Eric Schmidt นั่นเอง




นี่ส่วนของ Larry page กับ Sergey Brin หรูกว่ากันเยอะเลย

เก้าอี้นวด





ดูของเล่นดิ เพียบครับ



นี่คงกำลังคิดโปรเจคใหม่อยู่

วันเสาร์, มิถุนายน 02, 2550

Phishing Scams เมื่อคุณกลายเป็นเหยื่อ!!!

ปลายปี 2549 ที่ผ่านมา ปัญหาด้านความปลอดภัยที่ชวนปวดหัวในต่างประเทศได้ลุกลามมาถึงเมืองไทยอย่างจริงจัง เมื่อมีธนาคารแห่งหนึ่งได้ออกประกาศแจ้งเตือนลูกค้าของธนาคารว่า กำลังมีเว็บไซต์ปลอมแปลงโดยใช้ชื่อเว็บไซต์ที่คล้ายกับชื่อของธนาคารแห่งนั้นแต่แตกต่างกันที่ตัวสะกดเพียงนิดเดียวทำให้ผู้ที่ตกเป็นเหยื่อไม่ทันได้สังเกตุ โดยพวกมิจฉาชีพเหล่านี้จะส่งอีเมล์ไปหาลูกค้าของธนาคารเพื่อหลอกถามชื่อผู้ใช้และรหัสผ่าน วิธีการหลอกลวงลักษณะนี้ เรียกกันว่า ฟิชชิ่ง (Phishing) ออกเสียงเดียวกับคำว่า ตกปลา โดยมีผู้ใช้ออนไลน์เป็นเป้าหมาย และมักอาศัยอีเมล์เป็นเหยื่อล่อให้ติดเบ็ด ระวังไว้ซักนิดหากคุณได้รับอีเมล์ที่อ้างว่ามาจากสถาบันการเงินหรือเว็บไซต์ใดก็ตาม โดยมีข้อความประมาณว่า "ตอนนี้ข้อมูลส่วนตัวของคุณไม่ปลอดภัย", "บัญชีของท่านกำลังโดนถอนเงินอย่างผิดปกติ" หรือ "ธนาคารกำลังปรับปรุงระบบ ให้คุณช่วยเข้ามาอัพเดตข้อมูลให้หน่อย" .. เจออย่างนี้ ฟันธง!! โดนเหยื่อล่อเข้าแล้ว ถ้าเผลอไปคลิ้กลิงก์ที่แนบมาในอีเมล์ สิ่งที่คุณจะได้เห็นต่อไปก็คือ หน้าเว็บที่ดูคล้ายซะเหลือเกินกับที่ได้แอบอ้างมา สร้างหน้าเว็บพวกนี้ไม่ยาก บอกเลยว่าเด็กมัธยมก็ทำเองได้ ฉะนั้นอย่าให้สายตาของคุณถูกหลอกลวงด้วยภาพกราฟิกสวยๆ บนเว็บ แค่สังเกตซักนิดว่า บนแอดเดรสบาร์ (address bar) ของบราวเซอร์ เป็นชื่อเว็บที่ถูกต้อง เพราะพวกนี้มักอาศัยตัวสะกดที่ผิดเพี้ยนหรือไม่ก็เติมคำอะไรพิเศษต่อท้ายชื่อเว็บลงไป ทำให้คุณเข้าใจผิดได้ ถ้าหลงพลาดไปแล้วจะเกิดอะไรขึ้น? .. ก็เป็นไปได้ตั้งแต่เงินหายจากบัญชี ไปจนถึงการถูกแอบอ้างเอาข้อมูลส่วนตัวไปเปิดบัตรเครดิต บอกกันไว้นิดนึงว่า ในสหรัฐฯ นั้นมูลค่าความเสียหายต่อเหยื่อแต่ละรายสูงถึงสามหมื่นกว่าบาท ส่วนตัวเลขความเสียหายทั่วโลกในปี 2549 ที่ผ่านมา ก็ไม่มาก..แค่ 76,000 ล้านบาทเท่านั้น ที่สำคัญอัตราการเติบโตของปัญหา phishing นั้นเพิ่มสูงขึ้นทุกปีอย่างต่อเนื่อง

ถ้าไม่อยากตกเป็นเหยื่อ ..เราขอฝากเคล็ดลับไว้สองข้อ ข้อแรกคือ จำไว้ว่าไม่มีสถาบันการเงินไหนที่จะส่งอีเมล์มาขอให้คุณเข้าไปอัพเดตรหัสผ่านหรือข้อมูลส่วนตัวโดยเด็ดขาด ข้อสองคือ ถ้าจำเป็นจริงๆ อย่าคลิ้กลิงก์ .. ให้เปิดบราวเซอร์แล้วพิมพ์ที่อยู่ของเว็บด้วยมือตัวเอง รับรองว่าปลอดภัยแน่นอน

เคยงงกันไหมว่าสัญลักษณ์ +R หรือ –R บนแผ่น DVD หมายถึงอะไร??

เคยงงกันไหมว่าสัญลักษณ์ +R หรือ –R บนแผ่น DVD หมายถึงอะไร??


วันนี้เรามีวิธีเลือกซื้อแผ่นดีวีดีสำหรับใช้กับคอมพิวเตอร์มาฝากชาวมหานครแห่งความคิดของคนไอทีกัน เพราะเดี๋ยวนี้ราคาเครื่องบันทึกแผ่นดีวีดี หรือ DVD Writer ไม่ค่อยแพงแล้ว แถมราคาแผ่นยังอยู่ที่ประมาณแค่สิบกว่าถึงยี่สิบบาทเท่านั้น แต่ให้ความจุที่มากกว่าแผ่นซีดีทั่วไปถึงเกือบ 7 เท่า คืออย่างต่ำๆ ก็ประมาณ 4.7 กิกะไบต์นั่นละค่ะ เวลาบันทึกไฟล์วิดีโอก็ทำได้ในระดับที่ความละเอียดสูง ก็เลยมีคนนิยมใช้กันมากขึ้น

แต่ทุกๆคนทราบกันไหมว่าแผ่นดีวีดีที่วางขายอยู่ทั่วไปนั้น มีทั้งแบบบวก แบบลบ มีทั้งแบบ R และ RW เผลอๆ ไปเจอแบบ DL ด้วย ถ้าฟังแล้วงงล่ะก็ วันนี้เราจะมาเฉลยให้ทราบกัน
ที่มีแผ่นหลายชนิดก็ปัญหาเดียวกันกับ HD-DVD และ Blu-ray คือ มีหลายค่ายแข่งกันผลิตออกมา ทะเลาะกันมาหลายปีจนมาลงตัวเมื่อไม่กี่ปีมานี้ ค่ายแรกก็คือ DVD Forum ที่พัฒนาแผ่น DVD-R และ DVD-RW ซึ่งแผ่นตระกูล -R นั้นเล่นได้ดีกับเครื่องเล่นดีวีดีตามบ้านเราทั่วไปแต่เขียนได้ครั้งเดียวและบันทึกซ้ำบนพื้นที่เดิมไม่ได้ ส่วนแบบ -RW นั้น เราสามารถสั่งล้างแผ่นแล้วเขียนข้อมูลลงไปซ้ำได้กว่า 1,000 ครั้งเลยล่ะ

อีกมาตรฐานหนึ่งที่ใกล้เคียงกันก็คือ DVD+R และ DVD+RW จากทางกลุ่ม DVD+RW Alliance ฝั่งนี้ก็ให้ความจุมาตรฐานที่ 4.7 กิกะไบต์เท่ากับ -R หรือ -RW แต่ใช้เทคโนโลยีในการบันทึกข้อมูลลงแผ่นที่ต่างออกไป ว่ากันว่ามีสามารถบันทึกข้อมูลได้แม่นยำกว่าในระดับความเร็วสูงๆ และมีระบบตรวจจับความผิดพลาดที่ดีกว่า แต่ถ้าเทียบอายุแล้วถือว่าอ่อนกว่าแผ่นดีวีดีตระกูลลบ

นั่นก็เลยทำให้เครื่องเล่นดีวีดีตามบ้านเรารุ่นเก่าๆส่วนใหญ่จะเล่นได้เฉพาะแผ่นที่เป็น -R เท่านั้น แต่สำหรับคนที่ใช้พีซีนั้นเดี๋ยวนี้ไดรฟ์ดีวีดีมักจะเป็นแบบ Super Multi ที่ทั้งเขียนและอ่านได้ทั้งแผ่น DVD-R/-RW และ DVD+R/+RW ทำให้ไม่ค่อยมีปัญหาเรื่องการเลือกแผ่น

นอกจากนี้ยังมีแผ่นอีกแบบนึงที่เรียกว่า DL หรือ Dual Layer ซึ่งก็ให้ความจุเพิ่มขึ้นอีกเกือบเท่าตัว เป็น 8.5 กิกะไบต์ โดยอาศัยการสร้างชั้นสำหรับบันทึกข้อมูลเพิ่มขึ้นมาซ้อนกันอีกหนึ่งชั้น และยังมีแผ่นประเภท Double Side หรือแผ่นแบบกลับใช้ได้ทั้ง 2 หน้าด้วย แต่ไม่ค่อยได้รับความนิยมซักเท่าไหร่

ส่วนเวลาเลือกซื้อนั้น เดี๋ยวนี้จะใช้แผ่น - หรือ + ก็คงไม่ค่อยมีปัญหาถ้าเครื่องเล่นดีวีดีของคุณไม่ใช่รุ่นเก่ามาก แต่สังเกตกันไว้ซักนิดก็คงไม่เสียหาย อีกเรื่องนึงก็คือ ความเร็ว แผ่นพวกนี้จะมีความเร็วสูงสุดในการเขียนแผ่นติดมาให้ด้วย เช่น 4X, 8X, 12X เป็นต้น ยิ่งแผ่นที่เขียนได้เร็ว ก็ยิ่งมีราคาสูง และก็แน่นอนว่า มีโอกาสเกิดความผิดพลาดของข้อมูลได้ง่ายขึ้นด้วย
ฉะนั้นขอแนะนำว่าถ้าจะบันทึกอะไรสำคัญๆ ก็เขียนที่ความเร็วต่ำๆ ตั้งแต่ 4-8 เท่า ก็พอ ส่วนราคาของแผ่นดีวีดีที่บางทีราคาแตกต่างกันค่อนข้างเยอะ ทั้งๆ ที่เป็นแผ่นประเภทเดียวกันนั้น อันนี้ก็อยู่ที่กระบวนการผลิตและเกรดของแผ่น ซึ่งก็ส่งผลต่อความทนทานของแผ่นด้วย แต่ก็ไม่ใช่ว่าแผ่นเกรด B ราคาแผ่นละสิบบาทจะใช้ไม่ได้นะพอไหวเหมือนกัน .............